diff --git a/markdown/post/atx.md b/markdown/post/atx.md
index 1b929a3..365944c 100644
--- a/markdown/post/atx.md
+++ b/markdown/post/atx.md
@@ -20,11 +20,11 @@ The main parts I had to worry about were as folow in the table:
 
 After opening the case I saw a few things that had to go.
 
-![before](../img/atx/before.jpg)
+![](../img/atx/before.jpg)
 
 1. Hard Drive bays
 
-![hdd bays](../img/atx/hdd.jpg)
+![](../img/atx/hdd.jpg)
 
 I also took off the front IO panel since I have some plans to make this more flush later on, thus saving space to fit into a carry on bag.
 
@@ -33,18 +33,18 @@ I also took off the front IO panel since I have some plans to make this more flu
 I have no idea what this thing is but it had to go since it wouldn't let my motherboard fit into the case.
 Luckily there was only a few rivets holding it in to a quick chiseling and they were gone with the rack too.
 
-![psurack](../img/atx/rack.jpg)
+![](../img/atx/rack.jpg)
 
 ## Test fitting some things
 
 First I checked how the motherboard would fit into the case on its own; I was afraid of possibly adjusted the rear I/O sheild hole.
 
-![mb](../img/atx/mbtest.jpg)
+![](../img/atx/mbtest.jpg)
 
 Next I fiddled with the psu since fitting it into the case was going to be _really_ akward.
 It ended up being as weird as I though but ultimately it works and seems to be stable so what you see in the picture is the setup I went with.
 
-![psu](../img/atx/psutest.jpg)
+![](../img/atx/psutest.jpg)
 
 I completely forgot about the hard drives until the end, but it worked out in a _totally not ghetto way_.
 The 3.5 inc drive is the only one that I _really_ need to worry about for mounting honestly because of two reaons:
@@ -53,4 +53,11 @@ The 3.5 inc drive is the only one that I _really_ need to worry about for mounti
 * The other drive is a laptop drive \
 	Which I know still doesn't excuse the mounting but hey it coulnd't really move even if it wanted to.
 
-![hdd](../img/atx/hddfinal.jpg)
+![](../img/atx/hddfinal.jpg)
+
+Hard drives have a little shroud which I made out of some heavy duty duck tape and cardboard.
+Kinda sketchy but not really since it holds things in a clean position and doesnt rattle at all.
+
+There's one more ssd that you don't see but its tucked way up in the cd drive bay up top as I dont actually use that bay at all.
+
+All in all I like how everything turned out as this pc is now ready to be taken anywhere in the US as _carry-on_ luggage!