archetypes/default.md

@@ -1,8 +0,0 @@
----
-title: {{ replace .File.ContentBaseName "-" " " | title }}
-description: null
-date: {{ .Date }}
-draft: false
-category: article
----
-

config.toml

@@ -5,7 +5,5 @@ description = "Place to post stuff"
 
 theme = "shockrah.xyz"
 
-enableEmoji = true
-
 [markup.goldmark.renderer]
 unsafe = true

configs/neocities.toml

@@ -5,8 +5,6 @@ description = "Place to post stuff"
 
 theme = "shockrah.xyz"
 
-enableEmoji = true
-
 [markup.goldmark.renderer]
 unsafe = true
 

configs/pages.toml

@@ -5,8 +5,6 @@ description = "Place to post stuff"
 
 theme = "shockrah.xyz"
 
-enableEmoji = true
-
 [markup.goldmark.renderer]
 unsafe = true
 

content/posts/diy-slimevr.md

@@ -1,91 +0,0 @@
----
-title: Building SlimeVR Trackers for Full Body Tracking
-date: 2023-03-29
-draft: false
-description: From the cost, parts, and expectations. A full tutorial
-category: article
-image: /media/thumbnails/slimevr.png
----
-
-# Goal
-
-To build a Full body set of trackers:
-
-* 7 trackers
-* 3 extensions
-
-
-# Parts List & Prices
-
-**NOTE:** *Some extra components were purchased in case of defects*
-
-:warning: Huge caveats about the purchase list below :warning:
-
-1. Buy more parts than I did, ( especially BMI's ) because
-some of these have a horrible failure rate. 15+
-
-2. Maybe throw in an extra D1 ( 11 total ) because these can fail too.
-
-3. Batter chargers tend to be fine but can be prone to getting burned so be careful when soldering.
-
-## Main parts from AliExpress:
-
-* `10` D1 Mini for `20.53$`
-* `13` BMI 160 for `18.99$`
-* `10` 18650 Battery **chargers** for `6.81$`
-    * Keep in mind that this will also work for regular LIPO batteries
-* *See battery section for explanation*
-
-## Small parts from AliExpress:
-
-* 10 pack of DPDT 2P2T Panel Mount Switches for `2.99$`
-* 100 pack of 30K ohms for `4.05$`
-* 5 pack of 4Pin JST connections for `4.93$`
-* 50 pack of diodes for `2.53$`
-
-## Batteries
-
-For reference I bought:
-
-* `1` ( 10 piece ) EHAO 804040 3.7V 18mAh for `32.77$`
-
-While these do work, shipping time is pretty awful compared to everything else.
-Looking at the order of a few months for some vendors.
-To deal with this problem we can swap those out for some `18650`'s:
-
-* 10 pack of battery clips `7.99$`
-* Set of 10 batteries for `33.32$`
-
-* Total with taxes: `41.14$`
-
-I can attest that `18650batteries.com` is a reputable place to get batteries.
-*SideNote: includes shipping but you're mileage may vary depending on source*
-
-## Total Initial Cost With Shipping and Taxes
-
-If you buy the 804040 batteries: `93.60$`
-
-With the 18650's: `101.97$`
-
-## Assembly
-
-### Assumptions
-
-That the parts list above is being used however the points below
-are kept somewhat general.
-
-### Equipment
-
-Important to note that if you don't have soldering equipment you'll need
-to get some.
-Cheap kits can be found for under 50$ but make sure you have plenty of solder.
-
-1. 18650's are heavy so if possible
-
-For this reason it's not a bad idea to get some battery clips and mount 
-everything to that to keep things compact. When the weight of a tracker
-is imbalanced then it's much harder to mount as it tends to "swing" more.
-
-2. Heat shrink of varying sizes to clean up splices is basically required.
-
-3. \*Flux if you want however this is really not required at all.

content/posts/making-soap.md

@@ -1,77 +0,0 @@
----
-title: DIY Detergent
-date: 2023-07-05
-draft: false
-description: Cheap detergent at home
-category: article
-image:
----
-
-# Making detergent at home.
-
-Recipe and instructions are followed by some interesting things I found
-regarding cost and availability.
-
-# Recipe
-
-* 1 Part Borax
-* 1 Part Baking Soda ( Sodium *Bi-Carbonate* )
-* 1 Washing soda Semi-Optional ( Sodium *Carbonate* )
-    * **NOTE**: Can be made from baking soda if you can't find it in stores
-    * **NOTE**: While not required does greatly improve the quality of the detergent
-
-Optional additions
-* 1 Bar of Soap ( optional )
-    * No liquid soap will not work for this
-
-## Instructions
-
-Mix Borax, Baking Soda, and Washing Soda evenly in a container. If you are using 
-a bar of soap you can use a cheese grater to break it down so that you can mix
-this in with the rest.
-
-## Making Washing Soda ( Sodium *Carbonate* )
-
-Since this stuff can be hard to find you can also make it at home.
-
-Here's a video from __[NileRed](https://www.youtube.com/watch?v=cpGEc-pLXN4).__
-
-Quick transcription:
-
-1. Pour out baking soda ( sodium bi-carbonate ) into a pot
-2. As it heats up it will release CO2 and water
-    * This results in some bubbling
-3. Keep heating until bubbling stops and the powder appears like a dense powder.
-
-
-# FAQ & Stuff about cost
-
-> Is this actually cheaper than just buying a regular detergent?
-
-From my _very_ quick checks of prices around me I found Target had 16oz boxes of baking soda for 1$. A 4 lb box of Borax was 8$.
-
-For 3 pounds of detergent you would be looking at a 10$ investment of materials.
-
-* 1 lb baking soda ( 1$ )
-* 1 lb baking soda converted to washing soda ( 1$ )
-* 1 lb borax ( 2$ )
-
-In total **4$** for 3 pounds of unscented detergent isn't too bad.
-
-> Are there any alternatives to this sort of thing?
-
-Dish soap unironically works well enough for small loads you just have
-to play with the quantities.
-
-> What about unit prices for all of these things?
-
-Borax: https://www.intratec.us/chemical-markets/borax-price
-
-Baking Soda: https://www.intratec.us/chemical-markets/sodium-bicarbonate-price
-
-_Not including soap because this depends highly on what soap you choose_
-
-
-
-
-

content/posts/password-managers.md

@@ -1,87 +0,0 @@
----
-title: Password Managers
-description: just use unix pass
-date: 2024-04-30T16:12:04-07:00
-draft: false
-category: article
----
-
-# `pass` Shilling
-This one is gonna be short but I've come shill password manager that:
-
-* Allows for simple generation of passwords
-* Allows for easy backups to be made
-* Is compatible with basically any password access workflow you can think of
-* Is completely foss
-* Allows for both single and multiline passwords
-* Allows for optional opt-in versioning using git ( as a subcommand )
-  * Can also be used with other VCS's
-
-It's called `pass` --> https://www.passwordstore.org/
-
-# Examples
-
-Here's an example of how it works
-
-
-Simple Generation of passwords: 
-
-```
-~ pass generate example 100
-[master 3cfe907] Add generated password for example.
- 1 file changed, 0 insertions(+), 0 deletions(-)
- create mode 100644 example.gpg
-The generated password for example is:
-9m/Mk5WzLE75=QzhdD;T>}keXOv')FOh~S(=J43OAZ2qkxg<I>hjUJGRpav%oI<yq!ULw0<)@#P|+y0C2~q[O2=&^x{P_\v'K@\B
-```
-
-Want to straight up just copy it directly? Ok here you go with `-c`
-
-```
-pass generate example2 100 -c
-[master 55599f0] Add generated password for example2.
- 1 file changed, 0 insertions(+), 0 deletions(-)
- create mode 100644 example2.gpg
-Copied example2 to clipboard. Will clear in 45 seconds.
-```
-
-# Why tho
-
-Because it's completely dead simple to the point of absurdity. Want a really
-weird use case; pipe the output into a `qr` command and generate completely
-random qr codes. Using the same example as above:
-
-```
-pass example | qr
-█████████████████████████████████████████████████
-█████████████████████████████████████████████████
-████ ▄▄▄▄▄ ███▄▄▄ ▀▀▀▄▀▄▀ ▄▀▀▄ ▀█▄▀▄ █ ▄▄▄▄▄ ████
-████ █   █ ████ █▀▄▀ ▀ ▄█▀ ▄ █▀▀█▄ █▀█ █   █ ████
-████ █▄▄▄█ █▀▄  ▀▄▀ ▀█ ▀▀▄█▄▀ ▀▀ ▄▀▀ █ █▄▄▄█ ████
-████▄▄▄▄▄▄▄█▄▀▄▀ ▀ ▀ ▀ ▀ ▀▄█▄█ █▄▀▄█▄█▄▄▄▄▄▄▄████
-████▄▀█ █ ▄▀  ▀▄▀▄  ▄▄▀▄▀█▀██   ▀▄█ ▀▄▀▄█▀▀█▀████
-████ █▄▄ ▀▄  ▄█▀▄▄ █ █▄▄▀▀██  ▄▀ █▀▄ ▄ ▄▄█  ▀████
-████▀▄▄▄█▄▄▀██ ▀█ ▄▄▄▄█▄█ ▀▀▀▀▀ ███▄▀█▄██▀█▀ ████
-████▄▀ █▀▄▄  ▀▄▀ ▄ ▄▀  ▀▄▀▄ ▄▀▄█▀ ██▀█▀█▀ ▄  ████
-████▀▄ ▀█▄▄ ▄▄█  ██▀ ▄ ▄  █▀▄▀█   ▀ ▄█▀▀█▄▀▀ ████
-█████ ▀▀▀█▄▀▄████ ▄▄ ▀ █   ▀ ▄█▀▀▀▄▀▀▀▀▄  █▀▄████
-████ ▀ ▀██▄▀ ▀▀ ▄█ ▄▀▄ ▄▄▀▄█ ▄█▀ ▀▀▄█▄ ▄▄▄▀▄ ████
-█████▀▄██▀▄▄ ▄█▄█▀▀█▄█▄ ▀▀▄██▀ █▄█▀▄▀ ▀▄▀▄▀██████
-████▀█ █▄ ▄ ▄   █ ▀ ███   ▄▀  ██▀▄ ▀▀▀▄██ ▀▄▄████
-█████ ▄ ▀█▄█  ▄██▄▀ ▀▀▄▀  ▀   █▀▀▀▄█ ▀  ▄ ██ ████
-████▄▀▄▄██▄▄▄  ▀▀▄▄▄▄█▀▀▄ ▀█ ▀▄▀   ▄ █▀▀▄ █▀█████
-████▄██▀  ▄▄ ▀▄▄██ ▄▄▀▄   ▄██▄▀▀ ▀ █▀▄ ██ ▄▄ ████
-████▄███▄▄▄▄ ▀▄ █▀ ██▄█▄ █▀██ ▀█▄█▀  ▄▄▄ ▀█▄ ████
-████ ▄▄▄▄▄ █▀▄▄ ▄▄▄▄▄ █   ██▄▀█▀▄▄ █ █▄█ ▄▀▄▀████
-████ █   █ █▀ ▀ ▀▀▀▄ ███ █ █▀▀██▀▀▀▀▄▄  ▄▄█ █████
-████ █▄▄▄█ ████▄▀█▀ ▄▀▄▀▀ █▄▄▀█▀ ▀▀▄█▄ █ ▄█ ▄████
-████▄▄▄▄▄▄▄█▄▄█▄█▄█▄▄▄███▄▄█▄███▄▄▄█▄█▄▄██▄▄█████
-█████████████████████████████████████████████████
-▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
-```
-
-Also each password is just a file in a directory tree which means you can sort
-things however  you'd like which is also neat. Anyway that is all I had for now
-just thought this program I've been using for a while now was cool and deserved
-a quick post about it :smile:
-

content/posts/windows-grub-efi.md

@@ -1,117 +0,0 @@
----
-title: Fixing a windows EFI boot directory
-description: Because I can't into Grub
-date: 2023-10-27T18:27:05-07:00
-image: /favicon.png
-draft: false
-category: article
----
-
-# Context
-
-After making my usual Debian drive unusable ( thanks Nvidia ) from an 
-`apt upgrade` I found myself re-installing Debian all over again. Luckily
-I keep my `/home` and `/` mounted on separate partitions so this was
-pretty easy. When it came time to pick a drive to boot off of however I comletely
-forgot that I had a Windows drive that I had been using to jankily boot off of.
-
-_Sidenote_: I only forgot because I never bothered to remedy the situation of
-being forced to smack F12 9999 times every time I booted for a few months. :shrug:
-
-After re-installing Debian and getting setup once more I went to boot into
-Windows since I had some avatar modeling I wanted to do and.... couldn't boot.
-
-# Discovering what happened
-
-From Debian, check where the `/boot` is mounted to.
-In my case I have drives `sda` and `sdb` which contain Debian and Windows data
-respectively. I found the following
-
-1. `/boot` was mounted to `sdb`
-2. `/boot/efi/EFI/` did not contain any sort of Windows folder
-
-:mag: **HINT:** there are tools in Debian repos to repair this folder however
-I tested literally none so good luck.
-
-Basically the new Grub installation had wiped out the old `/boot` partition
-which I never paid attention to and removed it :facepalm: hence why it had
-no Windows section. Normally an `update-grub` would suffice **if** that folder
-was present but this was not enough.
-
-# Solution
-
-To make Windows bootable I setup a Windows installation USB drive using dd as such:
-
-```bash
-
-dd if=/path/to/Windows.iso of=/dev/<usb-drive> status=progress
-```
-
-Also this will hang when it gets to the end but seriously just give it some time
-because it basically has to verify everything after it's been copied over.
-
-Finally I found this post on superuser which shows how to bring back the EFI
-bootloader for windows so that Grub create a new entry for it and we can boot
-like normal :arrow_right: [answer](https://superuser.com/a/1444266)
-
-# Raw paste of Solution from 🌐 [superuser](https://superuser.com/a/1444266)
-In case that answer ever gets clobbered here is the raw paste:
-
-
-The other answers given here work great on MBR/BIOS systems, however if you're
-on a UEFI system like I am, bootsect will just write a semi-functional boot MBR
-over the [🌐 GPT protective MBR and bootrec](https://en.wikipedia.org/wiki/GUID_Partition_Table#Protective_MBR_(LBA_0))
-just gives an "Access denied" error message, and neither one has a functional
-option to fix a broken [🌐 EFI system partition](https://en.wikipedia.org/wiki/EFI_system_partition),
-which on a UEFI/GPT drive is what
-contains the bootloader that used to be stored in the MBR. There's unfortunately
-almost no up-to-date guides on fixing the UEFI Windows Boot Manager (almost all
-of them just say to run the graphical Startup Repair utility, but that doesn't
-fix the problem in all cases), but I finally found the correct solution buried
-in [🌐 this article](https://www.partitionwizard.com/clone-disk/bootrec-fixboot-access-is-denied.html),
-which requires the use of the [🌐 bcdboot](https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/bcdboot-command-line-options-techref-di) command instead:
-
-1. Grab the [🌐 Media Creation Tool](https://www.microsoft.com/en-us/software-download/windows10), make yourself a Windows 10 installation DVD or USB drive, and then boot into it.
-
-2. When prompted, choose "Repair your computer", followed by "Troubleshoot", "Advanced Options", and finally "Command Prompt".
-
-3. Run `diskpart` and then `list disk`. Note the disk number for the disk with your EFI system partition (ESP).
-
-4. Select that disk with `select disk x` (where `x` is the disk number from the last step).
-
-5. Run `list volume`. Note the volume number for your EFI system partition (ESP).
-
-6. Now do `select volume x` (where `x` is the volume number for the ESP) and then
-`assign letter=N:` to mount the partition. Run `list volume` again and note that
-the ESP is now assigned a driver letter. Run `exit` to leave `diskpart`.
-
-7. (Optional) If you are not currently dual booting and want to fully clean the
-ESP before writing a new bootloader, run `format N: /FS:FAT32` to reformat it as
-FAT32. This is probably not necessary under normal circumstances, however, as
-`bcdboot` seems to do a good job of cleaning things up itself. Especially **do not
-do this if you have a Linux distro on another partition** or else you'll have to
-reinstall GRUB as well once you're done with this. Also note that the following
-steps should not affect an EFI GRUB install as long as you do not otherwise
-delete GRUB's existing directory on the ESP.
-
-8. Finally, write the new bootloader to the partition with `bcdboot C:\windows /s N: /f UEFI`.
-This command rebuilds a new UEFI-compatible bootloader on the ESP mounted at `N:`
-using the Windows installation mounted at C:\windows. Once it's done, you can
-verify the new bootloader was written by running `dir N:\EFI`, where you should
-see a `Microsoft directory` containing the new Windows Boot Manager as well as a
-`boot directory` containing the fallback bootloader (along with other directories
-for any other bootloaders you have installed, such as GRUB for Linux).
-
-9. (Optional) If you are dual booting, you will probably need to boot into your
-Linux distro and run `sudo update-grub` to allow the GRUB scripts to detect and
-add the new Windows bootloader.
-
-10. Now boot into your BIOS setup and make sure "Windows Boot Manager" (or GRUB,
-if you're dual-booting) is set as the top boot choice. Save and reboot and
-you'll finally be back in Windows (or GRUB).
-
-
-Here are some links to help you understand EFI stuff ( because I still don't )
-
-* https://askubuntu.com/questions/1144636/three-questions-on-boot-efi-and-boot-mountpoints
-* https://support.microsoft.com/en-us/topic/use-bootrec-exe-in-the-windows-re-to-troubleshoot-startup-issues-902ebb04-daa3-4f90-579f-0fbf51f7dd5d

scripts/new-post.sh

@@ -2,10 +2,9 @@
 
 [[ "$1" = "" ]] && echo No filename given for new post\! && exit 1
 
-name="$(basename -s .md $1)"
+file="$(basename $1)"
 
-echo Creating new post content/posts/$name.md with metadata:
+cat << EOF | tee content/posts/"$file.md"
-cat << EOF | tee content/posts/"$name.md"
 ---
 title: $(basename -s .md "$file")
 date: $(date '+%F')

static/.well-known/discord

@@ -1 +0,0 @@
-dh=1c0133027994b982e04807790b3a6a3925e368d8

themes/shockrah.xyz/layouts/partials/head.html

@@ -22,7 +22,7 @@
 		<meta property="og:video:width" content="640">
 		<meta property="og:video:height" content="480">
 	{{ else }}
-		{{ $ogimage := printf "%s%s" .Site.BaseURL "/favicon.png" }}
+		{{ $ogimage := "{{ .Site.BaseURL }}/favicon.png" }}
 		{{ if .Params.Image }} 
 			{{ $ogimage = .Params.Image }} 
 		{{ end }}