Removing fluff

lab/roles/setup/defaults/main.yml

@@ -1,3 +0,0 @@
----
-# defaults file for setup
-LAB_FQDN: lab.local

lab/roles/setup/files/default.lablad

@@ -1,8 +0,0 @@
-# This config is purely for the default landing page that nginx normally serves 
-# up. The intention is to make Nginx's default page useful
-
-server {
-    listen 80 default_server;
-    listen [::]:80 default_server;
-    root /var/www/html;
-}

lab/roles/setup/files/etc/hosts

@@ -1,18 +0,0 @@
-# WARN: this should never be committed to source control
-# The following is used because we
-# use DNSMasq for its dead simple nature
-
-127.0.0.1       localhost
-127.0.1.1       recycled-lab-host
-
-# Sugma
-192.168.1.23    git.lablad
-192.168.1.23    files.lablad
-192.168.1.23    main.lablad
-192.168.1.23    music.lablad
-192.168.1.1     router
-
-# The following lines are desirable for IPv6 capable hosts
-::1     localhost ip6-localhost ip6-loopback
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters

lab/roles/setup/files/files.lablad

@@ -1,6 +0,0 @@
-server {
-	server_name files.lablad.net;
-	location / {
-		proxy_pass http://127.0.0.1:8080;
-	}
-}

lab/roles/setup/files/git.lablad

@@ -1,10 +0,0 @@
-# This file pertains to the Gitea service which is served under the FQDN:
-# git.lablad
-# The default port is listed under /vars/main.yml as 3000 as GITEA_PUB_PORT
-
-server {
-	server_name git.lablad.net;
-	location / {
-		proxy_pass http://127.0.0.1:3000;
-	}
-}

lab/roles/setup/files/home.lablad

@@ -1,8 +0,0 @@
-server {
-    root /var/www/html;
-    index index.html;
-    server_name lablad.net;
-    location / {
-        try_files $uri $uri/ =404;
-    }
-}

lab/roles/setup/files/metrics.lablad

@@ -1,10 +0,0 @@
-# metrics.lablad
-
-server {
-	server_name metrics.lablad.net;
-	proxy_set_header Host $http_host;
-	location / {
-		proxy_pass http://127.0.0.1:6000;
-	}
-}
-

lab/roles/setup/files/music.lablad

@@ -1,6 +0,0 @@
-server {
-	server_name music.lablad.net;
-	location / {
-		proxy_pass http://127.0.0.1:4040;
-	}
-}

lab/roles/setup/files/services/node_exporter.service

@@ -1,17 +0,0 @@
-[Unit]
-Description=Node Exporter which exposes host metrics for Prometheus
-After=network.target
-
-[Service]
-WorkingDirectory=/opt/prom-node-exporter
-Type=simple
-Restart=simple
-Restart=always
-Restart=10
-ExecStart=/opt/prom-node-exporter/node_exporter
-
-[Install]
-WantedBy=multi-user.target
-
-
-

lab/roles/setup/files/todo.lablad

@@ -1,8 +0,0 @@
-server {
-    server_name todo.lablad.net;
-    location / {
-        proxy_pass http://127.0.0.1:9238;
-    }
-}
-
-

lab/roles/setup/files/vault-config.json

@@ -1,14 +0,0 @@
-{
-	"backend": {
-		"file": {
-			"path": "/vault/file"
-		}
-	},
-	"listener": {
-		"tcp": {
-			"address": "0.0.0.0:{{VAULT_PORT}}",
-			"tls_disable": 1
-		}
-	},
-	"ui": true
-}

lab/roles/setup/files/vault.lablad

@@ -1,11 +0,0 @@
-# This file pertains to the Gitea service which is served under the FQDN:
-# vault.lablad
-# The default port is listed under /vars/main.yml as 8200 as VAULT_PORT
-
-server {
-	server_name vault.lablad.net;
-	location / {
-		proxy_pass http://127.0.0.1:8200;
-	}
-}
-

lab/roles/setup/meta/main.yml

@@ -1,31 +0,0 @@
-galaxy_info:
-  author: shockrah
-  description: This role provides multiple tools for setting up a private lab server
-  company: Personal
-
-  # If the issue tracker for your role is not on github, uncomment the
-  # next line and provide a value
-  # issue_tracker_url: http://example.com/issue/tracker
-
-  license: GPL-3.0-only
-
-  min_ansible_version: 2.1
-
-  # If this a Container Enabled role, provide the minimum Ansible Container version.
-  # min_ansible_container_version:
-
-  platforms:
-  - name: Ubuntu
-    versions:
-    - Jammy
-
-  galaxy_tags: []
-    # List tags for your role here, one per line. A tag is a keyword that describes
-    # and categorizes the role. Users find roles by searching for tags. Be sure to
-    # remove the '[]' above, if you add tags to this list.
-    #
-    # NOTE: A tag is limited to a single word comprised of alphanumeric characters.
-    #       Maximum 20 tags per role.
-
-dependencies:
-  - community.docker

lab/roles/setup/tasks/firewall_setup.yml

@@ -1,25 +0,0 @@
----
-- hosts: lab
-  become: yes
-  vars:
-    lan_subnet: "192.168.1.0/24"
-  tasks:
-    - name: Enable Firewall rules for basic LAN access
-      community.general.ufw:
-        rule: allow
-        port: '{{ item }}'
-        proto: tcp
-        src: '{{ lan_subnet }}'
-      loop:
-        - 22
-        - 53
-        - 80
-        - 443
-    - name: Enable K3s Ports
-      community.general.ufw:
-        rule: allow
-        port: '{{ item }}'
-        proto: tcp
-      loop:
-        - 6443
-

lab/roles/setup/tasks/get_latest_base_packages.yml

@@ -1,10 +0,0 @@
-# Simply update all required packages that we have on the system
-# This also takes care of updating any packages that must updated through means
-# of Git or some other non-apt method should it be required
----
-- hosts: leftcoastlab
-  become: yes
-  tasks:
-    - name: Distribution Upgrade
-      apt:
-        upgrade: dist

lab/roles/setup/tasks/k3s_setup.yml

@@ -1,154 +0,0 @@
----
-# Auto install from the quickstart 
-# If airgapped, all K3s artifacts are already on the node.
-- hosts:
-  tasks:
-  - name: Download K3s install script
-    ansible.builtin.get_url:
-      url: https://get.k3s.io/
-      timeout: 120
-      dest: /usr/local/bin/k3s-install.sh
-      owner: root
-      group: root
-      mode: 0755
-
-  - name: Download K3s binary
-    ansible.builtin.command:
-      cmd: /usr/local/bin/k3s-install.sh
-    changed_when: true
-
-  - name: Add K3s autocomplete to user bashrc
-    ansible.builtin.lineinfile:
-      path: "~{{ ansible_user }}/.bashrc"
-      regexp: '\.\s+<\(k3s completion bash\)'
-      line: ". <(k3s completion bash)  # Added by k3s-ansible"
-
-
-      - name: Enable and check K3s service
-        ansible.builtin.systemd:
-          name: k3s
-          daemon_reload: true
-          state: started
-          enabled: true
-
-      - name: Pause to allow first server startup
-        when: (groups['server'] | length) > 1
-        ansible.builtin.pause:
-          seconds: 10
-
-      - name: Check whether kubectl is installed on control node
-        ansible.builtin.command: 'kubectl'
-        register: kubectl_installed
-        ignore_errors: true
-        delegate_to: 127.0.0.1
-        become: false
-        changed_when: false
-
-      - name: Apply K3S kubeconfig to control node
-        when: kubectl_installed.rc == 0
-        block:
-          - name: Copy kubeconfig to control node
-            ansible.builtin.fetch:
-              src: /etc/rancher/k3s/k3s.yaml
-              dest: "{{ kubeconfig }}"
-              flat: true
-
-          - name: Change server address in kubeconfig on control node
-            ansible.builtin.shell: |
-              KUBECONFIG={{ kubeconfig }} kubectl config set-cluster default --server=https://{{ api_endpoint }}:{{ api_port }}
-            delegate_to: 127.0.0.1
-            become: false
-            register: csa_result
-            changed_when:
-              - csa_result.rc == 0
-
-          - name: Setup kubeconfig k3s-ansible context on control node
-            when: kubeconfig != "~/.kube/config"
-            ansible.builtin.replace:
-              path: "{{ kubeconfig }}"
-              regexp: 'name: default'
-              replace: 'name: k3s-ansible'
-            delegate_to: 127.0.0.1
-            become: false
-
-          - name: Merge with any existing kubeconfig on control node
-            when: kubeconfig != "~/.kube/config"
-            ansible.builtin.shell: |
-              TFILE=$(mktemp)
-              KUBECONFIG={{ kubeconfig }} kubectl config set-context k3s-ansible --user=k3s-ansible --cluster=k3s-ansible
-              KUBECONFIG={{ kubeconfig }} kubectl config view --flatten > ${TFILE}
-              mv ${TFILE} {{ kubeconfig }}
-            delegate_to: 127.0.0.1
-            become: false
-            register: mv_result
-            changed_when:
-              - mv_result.rc == 0
-
-  - name: Start other server if any and verify status
-    when:
-      - (groups['server'] | length) > 1
-      - inventory_hostname != groups['server'][0]
-    block:
-      - name: Copy K3s service file [HA]
-        when: groups['server'] | length > 1
-        ansible.builtin.template:
-          src: "k3s-ha.service.j2"
-          dest: "{{ systemd_dir }}/k3s.service"
-          owner: root
-          group: root
-          mode: 0644
-
-      - name: Enable and check K3s service
-        ansible.builtin.systemd:
-          name: k3s
-          daemon_reload: true
-          state: started
-          enabled: true
-
-      - name: Verify that all server nodes joined
-        when: (groups['server'] | length) > 1
-        ansible.builtin.command:
-          cmd: >
-            k3s kubectl get nodes -l "node-role.kubernetes.io/control-plane=true" -o=jsonpath="{.items[*].metadata.name}"
-        register: nodes
-        until: nodes.rc == 0 and (nodes.stdout.split() | length) == (groups['server'] | length)
-        retries: 20
-        delay: 10
-        changed_when: false
-
-  - name: Setup kubectl for user
-    block:
-      - name: Create kubectl symlink
-        when: lookup('fileglob', '/usr/local/bin/kubectl', errors='warn') | length == 0
-        ansible.builtin.file:
-          src: /usr/local/bin/k3s
-          dest: /usr/local/bin/kubectl
-          state: link
-
-      - name: Create directory .kube
-        ansible.builtin.file:
-          path: ~{{ ansible_user }}/.kube
-          state: directory
-          owner: "{{ ansible_user }}"
-          mode: "u=rwx,g=rx,o="
-
-      - name: Copy config file to user home directory
-        ansible.builtin.copy:
-          src: /etc/rancher/k3s/k3s.yaml
-          dest: ~{{ ansible_user }}/.kube/config
-          remote_src: true
-          owner: "{{ ansible_user }}"
-          mode: "u=rw,g=,o="
-
-      - name: Configure default KUBECONFIG for user
-        ansible.builtin.lineinfile:
-          path: ~{{ ansible_user }}/.bashrc
-          regexp: 'export KUBECONFIG=~/.kube/config'
-          line: 'export KUBECONFIG=~/.kube/config # Added by k3s-ansible'
-          state: present
-
-      - name: Configure kubectl autocomplete
-        ansible.builtin.lineinfile:
-          path: ~{{ ansible_user }}/.bashrc
-          regexp: '\.\s+<\(kubectl completion bash\)'
-          line: ". <(kubectl completion bash)  # Added by k3s-ansible"

lab/roles/setup/tests/test.yml

@@ -1,19 +0,0 @@
----
-- hosts: lab
-  tasks:
-    - name: Normal Echo
-      command: echo Quick test of an echo
-      register: normal_echo
-
-    - debug:
-        var: normal_echo.stdout
-
-    - name: Checking Sudo access
-      become: yes
-      command: echo One more test with sudo this time
-      register: sudo_echo
-
-    - debug:
-        var: sudo_echo.stdout
-    - debug:
-        var: sudo_echo.stderr

lab/roles/setup/vars/main.yml

@@ -1,13 +0,0 @@
----
-# vars file for setup
-UBUNTU_CODENAME: jammy
-GITEA_PUB_PORT: 3000
-GITEA_SSH_PORT: 2222
-FILEBROWSER_PORT: 8080
-LOKI_PORT: 3100
-GRAFANA_PORT: 6000
-SUBSONIC_PORT: 4040
-PROM_PORT: 9090
-KANBOARD_PORT: 9238
-KANBOARD_PORT_SSL: 9239
-VAULT_PORT: 8200